(→'''Starter''') |
(→Making a Starter) |
||
Line 4: | Line 4: | ||
Dry [[yeast]]s do not require a starter. Making a starter with dry yeast can be detrimental to their performance because they can use their nutrient reserves before pitching. | Dry [[yeast]]s do not require a starter. Making a starter with dry yeast can be detrimental to their performance because they can use their nutrient reserves before pitching. | ||
− | ===Making a Starter=== | + | <font size=4><I>(Outline of Article)</font></I> |
− | ( | + | |
+ | ==Making a Starter== | ||
+ | Making a starter is relatively straightforward, far easier than brewing an entire batch of beer. | ||
+ | |||
+ | ===Basic Outline=== | ||
+ | |||
+ | ====Prepare Yeast==== | ||
+ | *Allow yeast to come to room temperature. If it is a smack pack, smack it first. | ||
+ | |||
+ | ====Boil==== | ||
+ | *Start by bringing one pint of water to a boil in a two quart saucepan on the stovetop. | ||
+ | *Reduce the heat, add one half cup of Dry Malt Extract (DME) to the water, and mix it thoroughly. | ||
+ | *Gently boil the wort for ten minutes. | ||
+ | |||
+ | ====Cool==== | ||
+ | *Remove the saucepan from the stovetop, and cool it to room temperature, ~75ºF (~24ºC). | ||
+ | *Put the cool wort into an approximately half gallon (~2L) container. | ||
+ | *Cover and aerate thoroughly. | ||
+ | |||
+ | ====Pitch==== | ||
+ | *Pour the contents of the yeast vial or smack pack into the container. | ||
+ | *Shake to mix the yeast into th wort. | ||
+ | *Cover the container with a piece of foil or a loose-fitting cap. | ||
+ | |||
+ | ====Wait==== | ||
+ | *There will be very little sign of activity, but the starter should be ready in one to three days. | ||
+ | *You may step up the starter by adding additional wort over a period of days. | ||
+ | |||
+ | ====Pitch Starter==== | ||
+ | *After you have brewed your full batch, you may either: | ||
+ | **Shake the entire mixture again and pitch it into the wort | ||
+ | OR | ||
+ | :*Chill the mixture a day before pitching | ||
+ | :*Decant off the top layer of liquid before pitching just the yeast into the wort | ||
+ | |||
===Equipment=== | ===Equipment=== | ||
*Stir Plate | *Stir Plate |
Revision as of 00:33, 12 February 2007
Contents
Starter
With most liquid yeasts, the use of a starter is necessary in order to create a viable amount of pitchable yeast. Even yeasts marketed as directly pitchable can benefit from the creation of a starter. A starter reduces "lag-time", before fermentation commences, and can help prevent a stuck fermentation. A typical starter involves fermenting a vial or package of liquid yeast in an small amount of wort a few days before brewing.
Dry yeasts do not require a starter. Making a starter with dry yeast can be detrimental to their performance because they can use their nutrient reserves before pitching.
(Outline of Article)
Making a Starter
Making a starter is relatively straightforward, far easier than brewing an entire batch of beer.
Basic Outline
Prepare Yeast
- Allow yeast to come to room temperature. If it is a smack pack, smack it first.
Boil
- Start by bringing one pint of water to a boil in a two quart saucepan on the stovetop.
- Reduce the heat, add one half cup of Dry Malt Extract (DME) to the water, and mix it thoroughly.
- Gently boil the wort for ten minutes.
Cool
- Remove the saucepan from the stovetop, and cool it to room temperature, ~75ºF (~24ºC).
- Put the cool wort into an approximately half gallon (~2L) container.
- Cover and aerate thoroughly.
Pitch
- Pour the contents of the yeast vial or smack pack into the container.
- Shake to mix the yeast into th wort.
- Cover the container with a piece of foil or a loose-fitting cap.
Wait
- There will be very little sign of activity, but the starter should be ready in one to three days.
- You may step up the starter by adding additional wort over a period of days.
Pitch Starter
- After you have brewed your full batch, you may either:
- Shake the entire mixture again and pitch it into the wort
OR
- Chill the mixture a day before pitching
- Decant off the top layer of liquid before pitching just the yeast into the wort
Equipment
- Stir Plate