(→Stir Plate) |
(→'''Starter''') |
||
Line 1: | Line 1: | ||
− | = '''Starter''' = | + | ='''Starter'''= |
With most liquid [[yeast]]s, the use of a starter is necessary in order to create a viable amount of pitchable yeast. Even yeasts marketed as directly pitchable can benefit from the creation of a starter. A starter reduces "lag-time", before fermentation commences, and can help prevent a stuck fermentation. A typical starter involves fermenting a vial or package of liquid yeast in an small amount of wort a few days before brewing.<br> | With most liquid [[yeast]]s, the use of a starter is necessary in order to create a viable amount of pitchable yeast. Even yeasts marketed as directly pitchable can benefit from the creation of a starter. A starter reduces "lag-time", before fermentation commences, and can help prevent a stuck fermentation. A typical starter involves fermenting a vial or package of liquid yeast in an small amount of wort a few days before brewing.<br> | ||
Line 13: | Line 13: | ||
===Boil=== | ===Boil=== | ||
− | *Bring one pint of water to a boil in a two quart saucepan on the | + | *Bring one pint of water to a boil in a two quart saucepan on the stove top. |
*Reduce the heat, add one half cup of Dry Malt Extract (DME) to the water, and mix it thoroughly. | *Reduce the heat, add one half cup of Dry Malt Extract (DME) to the water, and mix it thoroughly. | ||
*Gently boil the wort for ten minutes. | *Gently boil the wort for ten minutes. | ||
===Cool=== | ===Cool=== | ||
− | *Remove the saucepan from the | + | *Remove the saucepan from the stove top, and cool it to room temperature, ~75ºF (~24ºC). |
*Put the cool wort into an approximately half gallon (~2L) container. | *Put the cool wort into an approximately half gallon (~2L) container. | ||
*Cover and aerate thoroughly. | *Cover and aerate thoroughly. | ||
Line 24: | Line 24: | ||
===Pitch Yeast=== | ===Pitch Yeast=== | ||
*Pour the contents of the yeast vial or smack pack into the container. | *Pour the contents of the yeast vial or smack pack into the container. | ||
− | *Shake to mix the yeast into | + | *Shake to mix the yeast into the wort. |
*Cover the container with a piece of foil or a loose-fitting cap. | *Cover the container with a piece of foil or a loose-fitting cap. | ||
Revision as of 00:54, 13 February 2007
Contents
Starter
With most liquid yeasts, the use of a starter is necessary in order to create a viable amount of pitchable yeast. Even yeasts marketed as directly pitchable can benefit from the creation of a starter. A starter reduces "lag-time", before fermentation commences, and can help prevent a stuck fermentation. A typical starter involves fermenting a vial or package of liquid yeast in an small amount of wort a few days before brewing.
Dry yeasts do not require a starter. Making a starter with dry yeast can be detrimental to their performance because they can use their nutrient reserves before pitching.
Starter Procedure
Making a starter is relatively straightforward, far easier than brewing an entire batch of beer.
Prepare Yeast
- Allow yeast to come to room temperature. If it is a smack pack, smack it first.
Boil
- Bring one pint of water to a boil in a two quart saucepan on the stove top.
- Reduce the heat, add one half cup of Dry Malt Extract (DME) to the water, and mix it thoroughly.
- Gently boil the wort for ten minutes.
Cool
- Remove the saucepan from the stove top, and cool it to room temperature, ~75ºF (~24ºC).
- Put the cool wort into an approximately half gallon (~2L) container.
- Cover and aerate thoroughly.
Pitch Yeast
- Pour the contents of the yeast vial or smack pack into the container.
- Shake to mix the yeast into the wort.
- Cover the container with a piece of foil or a loose-fitting cap.
Wait
- There will be very little sign of activity, but the starter should be ready in one to three days.
- You may step up the starter by adding additional wort over a period of days.
Pitch Starter
- After you have brewed your full batch, you may either:
- Shake the entire mixture again and pitch it into the wort
OR
- Chill the mixture a day before pitching
- Decant off the top layer of liquid before pitching just the yeast into the wort
Starter Equipment
Stir Plate
External Links
Back to Yeast