Difference between revisions of "Evaluating the crush"

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

(Evaluating the chush)
(Evaluating the crush)
Line 3: Line 3:
 
A good grain grist will contain an assortment of very coarse to very fine grain particles.<br>
 
A good grain grist will contain an assortment of very coarse to very fine grain particles.<br>
 
Some amount of very fine ground grain, in the form of flour, will not be a problem, but should represent a low percentage of the total grist.  Too much flour-fine grist can lead to a stuck sparge, driven by a doughy mash.  The goal of the crush is to crack the grains and expose the starches within.  A finer crush will increase this at the expense of removing the husks.  Another penalty for too fine a crush will be residual grain particles getting through your natural "grain bed" filter and ending up in the wort.<br>
 
Some amount of very fine ground grain, in the form of flour, will not be a problem, but should represent a low percentage of the total grist.  Too much flour-fine grist can lead to a stuck sparge, driven by a doughy mash.  The goal of the crush is to crack the grains and expose the starches within.  A finer crush will increase this at the expense of removing the husks.  Another penalty for too fine a crush will be residual grain particles getting through your natural "grain bed" filter and ending up in the wort.<br>
A medium crush will avoid these problems and will have comparable mashing efficiency.
+
A medium crush will avoid these problems and will have comparable mashing efficiency.<br>
 +
A very coarse crush can lead to lower mashing efficiency.

Revision as of 23:34, 12 February 2007

Evaluating the crush

A good grain grist will contain an assortment of very coarse to very fine grain particles.
Some amount of very fine ground grain, in the form of flour, will not be a problem, but should represent a low percentage of the total grist. Too much flour-fine grist can lead to a stuck sparge, driven by a doughy mash. The goal of the crush is to crack the grains and expose the starches within. A finer crush will increase this at the expense of removing the husks. Another penalty for too fine a crush will be residual grain particles getting through your natural "grain bed" filter and ending up in the wort.
A medium crush will avoid these problems and will have comparable mashing efficiency.
A very coarse crush can lead to lower mashing efficiency.

Top