Talk:Converting a cooler to a mash tun

Revision as of 19:34, 27 April 2008 by Tdallmann (talk | contribs) (New page: == '''Comments on RubberMaid MLT''' == I just followed the plans to convert my Rubbermaid cooer to a MLT, but this time with a 5 gallon cooler. The design worked perfectly! I also had ...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

Page Discussion
View source History

Comments on RubberMaid MLT

I just followed the plans to convert my Rubbermaid cooer to a MLT, but this time with a 5 gallon cooler. The design worked perfectly!

I also had another similar cooler from Igloo sitting around. The difference between the two coolers is that the Igloo does not have the same rubber seal as the Rubbermaid. To get around this, I purchased a 5/8" ID rubber grommet, which fit the hole perfectly. After that the rest of the assembly is the same as the Rubbermaid version.

Retrieved from "https://wiki.homebrewtalk.com/index.php?title=Talk:Converting_a_cooler_to_a_mash_tun&oldid=9490"
Top