Wortmonger (talk | contribs) (→Sources about spunding and to some brewers who use this device:) |
Wortmonger (talk | contribs) (→Sources about spunding and to some brewers who use this device:) |
||
Line 15: | Line 15: | ||
== Sources about spunding and to some brewers who use this device: == | == Sources about spunding and to some brewers who use this device: == | ||
[http://www.trailmonkey.com/lounging/yeasty.htm#Spunding Article from Trailmonkey.com], | [http://www.trailmonkey.com/lounging/yeasty.htm#Spunding Article from Trailmonkey.com], | ||
− | [http://www.homebrewtalk.com/showthread.php?t=44344 WortMonger], [http://www.homebrewtalk.com/showthread.php?t=50550 Poindexter], [http://www.homebrewtalk.com/showpost.php?p=221255&postcount=6 Kaiser] | + | [http://www.homebrewtalk.com/showthread.php?t=44344 WortMonger], [http://www.homebrewtalk.com/showthread.php?t=50550 Poindexter], [http://www.homebrewtalk.com/showpost.php?p=221255&postcount=6 Kaiser], |
− | [http://www.homebrewtalk.com/674250-post122.html WBC] | + | [http://www.homebrewtalk.com/674250-post122.html WBC], and |
+ | [http://www.homebrewtalk.com/794717-post2.html John Beere] | ||
+ | |||
If you or someone you know uses a valve like this, please feel free to edit yourself into the Wiki. This is a spot where the more the merrier really counts. | If you or someone you know uses a valve like this, please feel free to edit yourself into the Wiki. This is a spot where the more the merrier really counts. | ||
--By WortMonger, member of HBT.com 15:38, 13 August 2008 (CDT) | --By WortMonger, member of HBT.com 15:38, 13 August 2008 (CDT) |
Revision as of 23:49, 31 August 2008
Home brewing spunding valve in action!
Don't forget to check out Poindexter's Spunding Valve Video in this link.
Definition:
To Spund is German for bung, meaning to close up or seal. Spunding in brewing refers to the act of closing off a vessel containing beer or wort and allowing pressure to build inside the liquid. This is useful in the natural carbonation of a beverage such as beer. The spunding valve is a device consisting basically of a pressure gauge to show vessel pressure, and some way to release overly wanted pressure from that vessel. Normally something such as a adjustable back-pressure relief valve is used to control a set pressure, venting any excess gas out of the vessel. In this picture a simple on/off valve is used when venting, so there can be many variations on the broad idea.
Use in brewing:
Spunding valves help the brewer by allowing natural carbonation to build up. This happens inside a fermenting beverage when the vessel is sealed up toward the end of primary fermentation, or after the beverage is transfered to another vessel containing more fermentable sugar for carbonation during a secondary fermentation. Transferring or racking into another vessel containing fermentables after primary fermentation is complete is known as priming. This, is a really good article on spunding I found on the web while doing my research. Here, is a really good article where Kaiser talks about transferring or racking beer from one keg to another under pressure or "counter-pressure".
Sources about spunding and to some brewers who use this device:
Article from Trailmonkey.com, WortMonger, Poindexter, Kaiser, WBC, and John Beere
If you or someone you know uses a valve like this, please feel free to edit yourself into the Wiki. This is a spot where the more the merrier really counts.
--By WortMonger, member of HBT.com 15:38, 13 August 2008 (CDT)